The whole wheel assembly is detachable giving near universal fitment, even to hitch bars with inner frame clamps. With the wheel assembly removed there is no problem with ground clearance when in transit. Quick release screw-fit mechanism: completed in seconds - no tools, no fuss.

Overall Weight 16Kg Overall Height (with wheel assembly) 980mm (H)

Wheel Assembly 6Kg 250mm (H) x 200mm (W) x 215mm (D)

Main Body (without wheel assembly Footplate™ or handles) 7.0Kg - 795mm (H) x 108mm (W) x 108mm (D)

Drive Handle 0.8Kg - Extendable Length 240mm x 390mm x 130mm (W)

Tiller Handle 0.5Kg - 400mm (L) x 110mm (W) Clamp Tube 300mm (L) x 48mmØ

Clamp Height Adjustment (assembled) 220mm (min) to 730mm (max) from ground.

Operation stroke: 255mm Drive Gear Ratio 1:4.8

Tyres Diameter: 215mmØ Width: 55mm Max. Tyre Pressure: 30 PSI

Maximum Safe Working Loads 2000Kg (trailer) 150Kg (clamp weight) 150Kg (Footplate™)

Operating Clearances Wheel Assembly removal min 220mm (H)

Tiller Rotation (from clamp centre) 500mm Radius Drive Handle Rotation (from clamp centre)

Closed: 240mm Radius Extended: 390mm Radius

FAQ: Will it fit? The HitchDrive can be fitted to most trailers that use a standard jockey wheel secured with a clamp suitable for a 48mm diameter tube. The HitchDrive can be mounted using the same factory fitted jockey wheel clamp whether it located on the outside of the ‘A’-frame or if the clamp is situated within the ‘A’-frame underneath a plastic fairing. Please refer to the operating clearances document below to check suitability.

Can I travel with the HitchDrive? We recommend removal of the wheel assembly and extendable drive handle before travel.

Can I use the HitchDrive with a horse trailer? Yes, if the trailer is within the operating specifications as stated on our website.

VISIT http://www.hitchdrive.com.au for the full story...........